E-flite Ultimate 20-300 10 ARF - Manual (Page 25)

25 E-flite Ultimate 20-300 Assembly Manual
 2. Use four 4-40 x 1/2-inch socket head screws
and four #4 washers to attach the main landing gear
to the fuselage. Use a 3/32-inch ball driver to tighten
the screws.
Note: Use threadlock on the screws to prevent them from
vibrating loose.
Motor and Cowling Installation
Required Parts
Fuselage assembly Motor and mount
#4 washer (4) Hook and loop tape
Hook and loop strap Cowling
Spinner Spinner backplate
Speed control Motor battery
3-inch (76mm) servo extension
EC3 extension lead w/6-inch wire, 16 GA
Machine screw, 2mm x 8mm (4)
Sheet metal screw, 2mm x 8mm (2)
Socket head screw, 4-40 x 3/8-inch (4)
Required Tools and Adhesives
Phillips screwdriver: #1, #2 Ball driver: 3/32-inch
Threadlock
 1, Attach the X-mount to the motor using the screws
provided with the motor and a #2 Phillips screwdriver.
Note: Use threadlock on the screws to prevent them from
vibrating loose.