E-flite Ultimate 20-300 10 ARF User Manual

Page 23

E-flite Ultimate 20-300 Assembly Manual

Hint: Use a piece of string or some tape to secure the

two plugs together so that they cannot pull apart inside

the fuselage.



4. Position the servo in the opening. Use a pin drill and

1/16-inch (1.5mm) drill bit to drill the holes for the servo

mounting screws. Apply 2–3 drops of thin CA into each

hole to harden the surrounding wood. This will keep the

screws secure in the holes. Install the servo using the

screws provided with the servo.



5. Install the servo arm perpendicular to the servo.



6. Slide a clevis retainer onto the clevis of a 4-inch

(98mm) control linkage. Slide the link through the

connector and then attach the clevis to the outer hole of

the control horn.