beautypg.com

E-flite Ultimate 20-300 10 ARF User Manual

Page 12

background image

12

E-flite Ultimate 20-300 Assembly Manual



6. Use the string to pull the extension through the hole at

the center of the bottom wing.

Hint: Use low-tack tape to keep the ailerons from moving

during the servo installation.



7. Position the servo in the opening. Use a pin drill and

1/16-inch (1.5mm) drill bit to drill the holes for the servo

mounting screws. Use care not to slip and puncture the

covering on the top of the wing.



8. Apply 2–3 drops of thin CA into each hole to harden

the surrounding wood. This will keep the screws secure

in the holes. Install the servo using the screws provided

with the servo and a #0 Phillips screwdriver.