E-flite Ultimate 20-300 10 ARF - Manual (Page 3)

3 E-flite Ultimate 20-300 Assembly Manual
Contents of Kit/Parts Layout
Replacement Parts
EFL2751 Fuselage
EFL2752 Top Wing w/Ailerons, Left and Right
EFL2753 Bottom Wing w/Ailerons, Left and Right
EFL2754 Tail Set
EFL2755 Outer Wing Struts
EFL2756 Cowl
EFL2757 Canopy
EFL2758 Spinner
EFL2759 Landing Gear
EFL2760 Wheel Pants
EFL2761 Axles
EFL2762 Wheels
EFL2763 Hardware Set
EFL2764 Pushrod Set
Covering Colors
Scale White HANU973
Deep Blue HANU873
Silver HANU881
Bright Yellow HANU872
Required Radio Equipment
You will need a minimum 5-channel transmitter, receiver, and four
sub-micro servos. You can choose to purchase a complete radio
system. If you are using an existing transmitter, just purchase
the other required equipment separately. We recommend the
crystal-free, interference-free Spektrum ™ DX6i 2.4GHz DSM ®
6-channel system. If using your own transmitter, we recommend
the Spektrum 7.5-gram Super Sub-Micro Digital Programmable
Servos. When using the Spectrum DS75 servos with the Ultimate
20-300 you must use the Spectrum Digital Servo Programmer
(SPMDSP). This will allow you to get the proper travel, resolution
and geometry.
If you own the Spektrum DX6i radio, just add the AR6200
DSM2 ™ 6-channel receiver and four of our Spektrum 7.5-gram
Super Sub-Micro Digital Programmable Servos.
Complete Radio System
SPM6600 DX6i DSM 6CH system
Or Purchase Separately
SPMAR6200 AR6200 DSM2 6-Channel Receiver Ultralite
(for DX6i or DX7)
And
SPMDSP Spektrum Digital Servo Programmer
SPMDSP75 7.5-gram Super Sub-Micro Digital
Programmable Servo (4)
EFLREX3L 3-inch Extension, Lightweight
EFLREX6L 6-inch Extension, Lightweight (4)
EFLREX9L 9-inch Extension, Lightweight
EFLREX12L 12-inch Extension, Lightweight