Watts W100T Twin Alternating Series - Manual (Page 30)

30 W100T Twin Alternating Series Softeners
Drain Line – 3/4”
Drawing No. Order No. Description Quantity
1 H4615 Elbow Locking Clip 1
2 PKP10TS8-BULK Polytube insert 5/8 Option
3 V3192 W100T Nut ¾ Drain Elbow Option
4* V3158-01 W100T Drain Elbow ¾ Male 1
5 V3163 O-ring 019 1
6* V3159-01 W100T DLFC Retainer ASY 1
7
V3162-007 W100T DLFC 0.7 gpm for ¾
One DLFC must
be used if ¾
fitting is used
V3162-010 W100T DLFC 1.0 gpm for ¾
V3162-013 W100T DLFC 1.3 gpm for ¾
V3162-017 W100T DLFC 1.7 gpm for ¾
V3162-022 W100T DLFC 2.2 gpm for ¾
V3162-027 W100T DLFC 2.7 gpm for ¾
V3162-032 W100T DLFC 3.2 gpm for ¾
V3162-042 W100T DLFC 4.2 gpm for ¾
V3162-053 W100T DLFC 5.3 gpm for ¾
V3162-065 W100T DLFC 6.5 gpm for ¾
V3162-075 W100T DLFC 7.5 gpm for ¾
V3162-090 W100T DLFC 9.0 gpm for ¾
V3162-100 W100T DLFC 10.0 gpm for ¾
Valves are shipped without drain line flow control (DLFC) - install DLFC before using. Valves are shipped without ¾ nut for drain elbow (polytube
installation only) and 5/8" polytube insert (polytube installation only).
*4 and 6 can be ordered as a complete assembly - V3331 W100T Drain Elbow and Retainer Asy
Water
Flow
Proper DLFC orientation
directs water flow towards
the washer face with
rounded edge.
3
2
5
6
4
1
7