Watts Autotrol 263 / 268 (Logix Series) - Manual (Page 42)

42 PROGRAMMING THE 700 FOR 5-CYCLE FILTER APPLICA-
TIONS
700 Series Advanced Programming
The 700 Series controllers are designed to operate by only setting the time
of day and the day of the week. The remaining settings have been set at
the factory. These default settings will work for most applications.
To change a setting:
This level of programming is accessible by pressing the SET button. The
UP and DOWN arrows will step through the settings:
Time of day
Day of week
Time of regeneration
Number of days between regeneration (99 day timer)
Day of week regeneration (displays only when number of days
between regeneration equals zero) (7 day timer)
Amount of regenerant used per regeneration or filter backwash time
System capacity (view only)
Action Key Duration Display
Enter basic
programming SET Press and
Release Will show day of week
Move to desired
display UP or DOWN
arrows Press and
Release Will increment through
the displays
Enable setting to be
changed SET Press and
Release Display will flash
Change setting UP or DOWN
arrows Press and
Release Value changes and
continues to flash
Save setting SET Press and
Release Display stops flashing
Return to operation REGEN Press and
Release Normal operation display
View history values SET and DOWN Press and
Hold for 5
seconds HO will be displayed
For Regeneration
SET UP arrow
DOWN
arrow