Watts LFWP23B - Manual

Note: Watts WaterPEX CinchClamp ™ fittings should not be
used with wrought copper PEX fittings.
LFWP19
Crimp x Crimp
LFWP20
Crimp x MPT
LFWP21
CrimpRing™ x Sweat Elbows
Drop Ear Elbows
LFWP22
LFWP23
* The wetted surface of this product contacted by consumable water
contains less than one quarter of one percent (0.25%) of lead by
weight.
For Residential Commercial Applications
ES-WP-LFBrassElbows
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
LEAD FREE
*
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-
out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Lead Free * Brass
CrimpRing ™ Elbows
Lead Free* Brass CrimpRing ™ Elbows are used to make a 90º
change between WaterPEX ® pipe or between WaterPEX ® pipe
and threaded pipe. The Lead Free* Brass CrimpRing ™ Brass
Elbows features Lead Free* construction.
Specifications
System shall be plumbed using Watts cross-linked polyethylene
pipe. All joints shall be made using Watts Lead Free* Brass
CrimpRing ™ and/or Poly-alloy CrimpRing ™ fittings using either
the Watts copper CrimpRing ™ or stainless steel CinchClamp ™
crimping methods as outlined in the Watts Installation Guide-
lines. Lead Free* Brass CrimpRing ™ fittings shall comply with
state codes and standards, where applicable, requiring reduced
lead content.
Installation Note
Lead Free* Crimp Elbows must be installed in accordance with
all Watts installation procedures, including information provided
in the appropriate installation manual and guidelines.
Approvals
• Manufactured in accordance with American Society for
Testing and Materials (ASTM International) F877 and F1807
• Listed by the NSF International to NSF Standards 14 and 61
for use in potable water systems
• Listed by NSF International to be in compliant to the Uniform
Plumbing Code
• Labeled B137.5 which indicates that it is compliant
to the CSA Standards B137.5