Watts PWWR - Manual

Plastic Filter Housings
Top Quality and Economical
Plastic Filter Housings
Single Cartridge Filter Housings
For Residential and Light Commercial Applications
ES-WQ-PWHP
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
Buttress thread design —
Provides greater security Heavy-duty construction —
Housings are made entirely
of the highest quality FDA
grade polypropylene
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-
out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
PURE WATER
Sizes: 1 ⁄
4
" – 1 1 ⁄
2
" (6 – 40mm)
Our poly filter housings are manufactured from the highest
quality, FDA grade, 100% polypropylene and acrylic styrene
(for clear housings). Leak-proof sealing is accomplished by
compression against a top seated EPDM O-ring located in the
housing’s sump. Thick wall and added ribs make the housings
ideal for a wide range of applications. Polypropylene construc-
tion provides excellent chemical resistance in most installations
environments. Housings supplied with and without pressure
relief valves. See specifications table for pressure and tempera-
ture ratings.
Full product line
We offer a complete line of poly filter housings for virtually every
application where single cartridge housings are typically used.
Select from standard, heavy-duty, full-flow, high-purity, high-
temp and valve-in-head models.
Features
• Full product line for more types, models, pipe fittings
and options
• Heavy-duty construction, made using high-quality FDA
grade polypropylene
• Superior chemical resistance from many aggressive
chemicals
• Buttress thread design for superior security
• Thick side walls with heavy-duty ribs to provide
greater strength
• Temperature rated to 125°F (52°C)
• Cap, sump and top-seated O-rings compress to provide
leak proof sealing
See specifications table for more details.
Note: Do not use with water that is microbiologically unsafe or
of unknown quality without adequate disinfection before or after
the system.