Watts 1024RB - Manual

Series 10
Quick-Connect Tees
Watts Quick-Connect Tees are designed and manufactured
for many years of trouble free service. Produced of off white
polypropylene, a high performance thermoplastic material,
the Watts Quick-Connect design allows for quick and easy
connections without the use of installation tools.
Specifications
Connection shall be made using Watts Series 10
Quick-Connect fitting with Integral Collet and O-Ring Guide.
Fitting shall be able to fully rotate under pressure and allow
easy disconnect and reuse without the use of disconnection
tools. Fitting must not disassemble to disconnect.
Approvals
• Listed by the National Sanitation Foundation to NSF
Standard 61 for use in potable water systems
Ratings
150psi @ 70°F (10 bar @ 20°C)
60psi @ 140°F (4 bar @ 60°C) Min. 33°F (1°C)
Example
1024RB-04
10 = Series 10
24 = Reducing Tee
R = Reducing
B = Bag
060604 = 3 ⁄
8
" OD x 3 ⁄
8
" OD x 1 ⁄
4
" OD
For Point-of-Use Water Applications
ES-QC-10 Tees
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
1023B
1024RB
Caution: The polypropylene material used in the Quick-Connect fittings
can be compromised by exposure to volatile organic compounds
(VOC’s) and caustic chemicals. Therefore, DO NOT expose this product
to any such chemical or foreign substance, which would include
exposure to the following products: Pipe Dopes (thread sealants),
bug sprays, lubricants, cleaners, paints, bleaches, acids, solder fluxes,
plastic piping primers and cements, oxidizing agents, alkaline solutions,
thinners, fuels, oil based caulks, hydrocarbons, spray foam of foaming
agents (insulation).
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-
out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
LEAD FREE
*
* The wetted surface of this product contacted by consumable
water contains less than one quarter of one percent (0.25%) of
lead by weight.