beautypg.com

Keypad — buttons – Watts Autotrol 263 / 268 (Logix Series) User Manual

Page 30

background image

30

DISPLAY ICONS 700 CONTROLLER

Rev A

KEYPAD — Buttons

1. DOWN arrow. Generally used to scroll down or increment through a

group of choices.

2. SET. Used to accept a setting that normally becomes stored in

memory. Also used together with the arrow buttons.

3. UP arrow. Generally used to scroll up or increment through a group of

choices.

4. Regenerate. Used to command the controller to regenerate. Also used

to change the lock mode.

Programming Conventions

The 700 Series controller is programmed using the buttons on the keypad.
The programming instructions will be described two ways whenever a
section has keypad input.
First, a table shows simplified instructions. Second, text follows that
describes the action. In each table:
"Action" lists the event or action desired.
"Keys" are listed as:

UP for up arrow

DOWN for down arrow

SET for set

REGEN for regeneration

2

1

3

4

NOTE:

If a button is not pushed for thirty seconds, the controller returns to

normal operation mode. Pushing the regenerate button immediately returns
the controller to normal operation.