Creating inspections creating inspections – Banner PresencePLUS Pro COLOR—PROII Camera User Manual
Page 7

Banner Engineering Corp.
•
Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
page
7
Tool Options
Location T
ools
Pattern
Find
Translation and
rotation
Locates the target by searching for a taught pattern
and compensates for translation and ±10° of rotation.
Locate
Translation and
rotation
Finds the edge of the part and compensates for
translation and rotation.
Vision T
ools
Average
Gray
Scale
Determines
presence, absence,
color sensitivity
Determines the average gray-scale value in the Region
of Interest (ROI).
Blob
Counts and
measures areas
Detects groups of connected light or dark pixels within
ROI; designates them as “Blobs”. After Blobs are
found, they can be counted, sized and located.
Edge
Counts and
locates edges
Detects and counts transitions between bright and
dark pixels. The total number of edges can be counted
and the position of each edge can be found.
Object
Locates and counts
objects, determines
midpoints and
measures widths
Detects the edges of dark and bright objects,
locates their midpoints, counts dark and bright objects
and measures the widths of each dark and bright
object.
Pattern
Count
Find one or more
patterns
Locates and counts a taught pattern.
Measure
Measures between
points
Measures distance between two prescribed points.
These points can be either edges or centroid locations.
Test
Logic
input/output
Evaluates results of selected vision and analysis tools
to determine whether an inspection passes or fails. It
also performs logical operations and activates outputs.
Analysis T
ools
creating
inspections
creating
inspections
Tool Name
Function
Description
This screen automatically configures the parameters
chosen in the tools screen.
a. Choose the sample size
b. Click Start
c. Trigger the controller with the external trigger device
d. Click Stop
e. Click Next to proceed to Run
Before entering Run, save the inspection file to one of the
12 memory locations on the controller.
3.
TIPS
TIPS
• Each
inspection
must contain
at least one
Vision tool and
one Test tool.
• Save a backup
copy of your
inspection to
the host PC.
68369 (ppp quickstart guide) 5/7/02 11:50 AM Page 7