Metrohm 838 Advanced Sample Processor Installation Instructions - Manual (Page 43)

3.3 Fitting the accessories
Metrohm 838 Advanced Sample Processor, Installation 37
3.3.19 Fitting the safety guard/splash guard
It is essential to fit the safety guard
before using the 838 Advanced Sam-
ple Processor for the first time. It not
only acts as an effective splash guard
but also prevents the risk of injury.
The safety guard must be fitted with
the securing screw on the side of the
tower of the 838 Advanced Sample
Processor. The height of the safety
guard can be adapted to the sample
vessels.
Figure 30 Fitting the safety guard
Securing screw