5 declaration of conformity, 838 advanced sample processor – Metrohm 838 Advanced Sample Processor Installation Instructions User Manual
Page 105

6.5 Declaration of Conformity
Metrohm 838 Advanced Sample Processor, Annex
99
6.5 Declaration of Conformity
This is to certify the conformity to the standard specifications for electrical appliances and ac-
cessories, as well as to the standard specifications for security and to system validation issued
by the manufacturing company.
Name of commodity
838 Advanced Sample Processor
CH-9101 Herisau/Switzerland
www.metrohm.com
Description
Sample changer with advanced Liquid Handling abilities for the automation of batch
processing of sample preparation in analytical laboratories.
This instrument has been built and has undergone final type testing according to the standards:
Electromagnetic compatibility: Emission
EN/IEC 61326, EN 55022 / CISPR 22, EN/IEC 61000-3-2
Electromagnetic compatibility: Immunity
EN/IEC 61326, EN/IEC 61000-4-2, EN/IEC 61000-4-3, EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC
61000-4-6, EN/IEC 61000-4-8, EN/IEC 61000-4-11, EN/IEC 61000-4-14, NAMUR
Safety specifications
EN/IEC 61010-1, EN/IEC 61010-2-081, UL 3101-1 protection class I
It has also been certified by ElectroSuisse, a member of the International Certification Body (CB/IEC).
The instrument meets the requirements of the CE mark as contained in the EU direc-
tives 89/336/EEC and 73/23/EEC and fulfils the following specifications:
EN 61326
Electrical equipment for measurement, control and laboratory use – EMC requirements
EN 61010-1 Safety requirements for electrical equipment for measurement, control and laboratory
use
EN 61010-2-081 Part 2-081: Particular requirements for automatic and semi-automatic laboratory
equipment for analysis and other purposes.
Metrohm Ltd. is holder of the SQS-certificate of the quality system ISO 9001 for quality assurance in
design/development, production, installation and servicing.
The system software, stored in Read Only Memories (ROMs) has been validated in connection with
standard operating procedures in respect to functionality and performance.
The technical specifications are documented in the instruction manual.
Herisau, February 16, 2004
D. Strohm
Ch. Buchmann
Vice President
Vice President
Head of R&D
Head of Production
Responsible for Quality Assurance