Metrohm 863 Compact Autosampler - Manual (Page 48)

5.4 Performing a sample series ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
38 ￭￭￭￭￭￭￭￭ 863 Compact Autosampler
Note
When using the method template VA 797 Manual start, the
method has to be started first at the sample changer in the sample
series dialog with the [START] key. The sample changer then
waits for a stepping pulse of the 797 VA Computrace.
Stopping a sample series
A sample series can be canceled at any time.
1 Press the [STOP] key.
The method run is stopped. The sample series cannot be resumed.
5.4.2 Pausing a sample series and continuing
Pausing a sample series
A method run of the 863 Compact Autosampler can be paused and then
continued again. The connected instruments are however not paused.
Note
Interruption of the method run is not possible during the execution of
commands during which the 863 Compact Autosampler waits for a sig-
nal from the connected titrator. This is the case during the conditioning
of the titration cell and the execution of the KF titration.
No interruption is possible while the 863 Compact Autosampler waits for
a remote signal.
A function bar with the entry "Hold" is displayed during the run of a sam-
ple series in the so-called "Live" dialog.
1 Press the [OK] key.