Metrohm 863 Compact Autosampler - Manual (Page 11)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 1 Introduction
863 Compact Autosampler ￭￭￭￭￭￭￭￭ 1
1 Introduction
1.1 Instrument description
The 863 Compact Autosampler is an autosampler for ion chromatography
or voltammetry with a wide variety of applications. It can be used both as
a central control instrument in a stand-alone automation system or as an
integrated sample changer in a PC-controlled automation system.
1.1.1 Instrument versions
The 863 Compact Autosampler is available in two versions with different
accessories.
863 Compact IC Autosampler (2.863.0010)
With accessories for ion chromatography.
863 Compact VA Autosampler (2.863.0020)
With accessories for voltammetry.
1.1.2 Instrument components
The 863 Compact Autosampler has the following components:
￭ Turntable
Permanently mounted sample rack with 36 positions for sample tubes.
￭ Lift with lift head
With needle holder for PEEK needles.
￭ 1-channel peristaltic pump
For the transport of sample solutions.
￭ USB (OTG) connector
For connection to a computer, to a printer or to a USB stick (for system
backup or method export).
￭ Remote connector
For connecting instruments with a remote connector.
1.1.3 PC-controlled operation
If the 863 Compact Autosampler is controlled by means of a USB connec-
tion using the PC software MagIC Net, then arbitrary automation
sequences can be programmed. This allows optimal utilization of the
instrument components. The software can trigger the instrument compo-
nents directly and use them more flexibly.