Metrohm 863 Compact Autosampler - Manual (Page 46)

5.4 Performing a sample series ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
36 ￭￭￭￭￭￭￭￭ 863 Compact Autosampler
2 Select a method
￭ Select the desired method.
3 Export the method
￭ In the function bar, select Export and press [OK].
The method is being exported. The directory structure on the USB
stick is listed in chapter 6.2, page 47.
5.4 Performing a sample series
Samples can be placed anywhere on the rack. They are processed accord-
ing to ascending rack position.
If the 863 Compact Autosampler is used together with the 797 Compu-
trace, each vessel with sample has to be followed by one with ultrapure
water.
Note
The following descriptions are only of significance if the 863 Compact
Autosampler is operated in stand-alone operation, i.e. not controlled by
a PC via a USB connection.
5.4.1 Starting the sample series
Starting a sample series
A suitable method must be loaded before a sample series is started (see
Chapter 5.3.4, page 35). The necessary parameters ) can then be modi-
fied.
1 Define the sample series
Press the [START] key.