Metrohm 863 Compact Autosampler - Manual (Page 44)

5.3 Methods ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
34 ￭￭￭￭￭￭￭￭ 863 Compact Autosampler
To save a method, proceed as follows:
1 Open the method table
￭ In the main dialog, select Method and press [OK].
The method table opens:
2 Modify/apply the method name
￭ In the function bar, select Store and press [OK].
A method name will be suggested for new methods. If the
method has already been saved once, then the method name will
be displayed:
Apply the name:
￭ Press [BACK].
The method will be saved and the method table is displayed.
Enter a new name:
￭ Press [OK].
The text editor opens.
￭ Enter a method name (max. 12 characters) and apply with
Accept or [BACK].
￭ Press [BACK].
The method will be saved and the method table is displayed.