DJI Z15 - Manual (Page 4)

©2012 DJI Innovations. All Rights Reserved.
4
In Box
Gimbal × 1
In the mechanical structure, the gimbal has built-in slip rings,
preventing wire rod from winding up, which also enables free rotations
for the 3 axes rotating rods.
The gimbal has built-in Z15 gimbal special servos drive module ,
independent IMU module and HDMI
－AV
module.
Gimbal Controller Unit (GCU) × 1
Connect the gimbal controller to the autopilot system by CAN bus.
The GCU will control the gimbal’s pan, roll and tilt axes rotation.
Lens Retaining Ring × 1, L-Connector × 1(Z15-N)
For fixing the camera lens .
(With jackscrew × 2)
Lens Retaining Ring Shim × 1(Z15-N)
For fastening the camera lens.
Mounting Bracket × 4
For gimbal and bi-pod connection.
Camera Mount Screw × 1
For camera mount.
Lens Retaining Ring Screw × 1(Z15-N)
For fixing the lens retaining ring to the gimbal.
Hot Shoe × 1(Z15-G)
For fastening the camera to gimbal.