DJI Z15 - Manual (Page 31)

©2012 DJI Innovations. All Rights Reserved.
31
Trouble Shooting
NO. What Why How to
1
Gimbal keeps drifting
after initialization
(1) TX trims are too much (1) Adjust the TX trims
(2)GCU and autopilot system
is disconnected
(3)Z15 mounting direction is
disaccording to aircraft nose
(2)Connect GCU and autopilot
system
(3)Ensure Z15 mounting direction
is the same with aircraft nose
2
The gimbal is abnormal
after initializing
Abnormal calibration after
manufacture
Please contact local dealer or DJI
Innovations customer service
3
Can
’t distinguish gimbal
pointing when using
BVR flight
Switch to FPV Mode first, then to
another Working Mode needed
4 Gimbal LED flashing red
(1) The gimbal and camera
disconnected
(2)Camera is off
(3) Camera setup failure
(1)Make sure cable connected
(2)Please power on camera
(3)Set HDMI resolution as 1080i
5
Gimbal green LED is on
but without video display
(1) Wireless video
transmission unit disconnected
(2)Wrong power supply for
wireless video transmission
unit
(1) Check the wireless video
transmission unit connection
(2) Ensure the power supply for
wireless video transmission unit is
12V