DJI Naza-M - Manual

©2013 DJI Innovations. All Rights Reserved.
Naza
－M V2
Quick Start Guide
V 1.26
2014.05.12 Revision
For Firmware Version V4.02 or above
& Assistant Software Version V2.20 or above
Thank you for purchasing this DJI product. Please strictly follow these steps to mount and connect this system on
your aircraft, as well as to install the Assistant Software on your computer.
Please regularly check the web page of corresponding product
*
at our website
www.dji.com
, which is
updated regularly. Product information, technical updates and manual corrections will be available on this web
page. Due to unforeseen changes or product upgrades, the information contained in this manual is subject to
change without notice.
*
Important: Naza-M, Naza-M V2 and PHANTOM control system are different in hardware parts, but their
configurations and functions are the same when using the same Assistant Software and Firmware Version, so they
use the same Guide. Unless stated, the following instruction is basic on Naza-M V2. If you use the Naza-M, please
make sure to read the “Instruction of V1 (also known as Naza-M)” section; if you use the PHANTOM, download the
other corresponding manuals on the PHANTOM web page.
This manual is only for basic assembly and configuration; you can obtain more details and advanced instructions
when using the assistant software. To assure you have the latest information, please visit our website and download
the latest manual and current software version.
If you have any problem that you cannot solve during usage, please contact your authorized dealer.