DJI Z15 - Manual (Page 32)

©2012 DJI Innovations. All Rights Reserved.
32
Specifications
General
Built-In Functions  Three Working Modes
 Orientation-locked control
 Non orientation-locked control
 FPV mode (Reset)
 Built-in independent IMU module

DJI gimbal special servos drive module
 HDMI- AV module
 Wireless video transmission support
 Camera shutter control support
 Z15-N video recording control support
 Wide range voltage input support
 S-Bus/PPM Receiver support
Peripheral
Supported Camera  SONY NEX-5N
 SONY NEX-7
 SONY NEX-5R

Panasonic GH2
Supported Lens Currently  SONY : E 16mm f/2.8(SEL16F28)
 Panasonic : Lumix G14 mm/F2.5
Lumix G20 mm/F1.7
GCU Input Power 4S~12S LiPo (Recommend 6S if with S800)
Control Requirement Four spare receiver channels at least
Assistant Software System Requirement Windows XP SP3; Windows 7
Mechanical& Electrical Characteristics
Working Current

Static current: 200mA (@25V)
 Dynamic current: 400mA (@25V)
 Locked-rotor current: 4A (@25V)
Operating Temperature -10°C ~ 50°C
Weight  Z15-N : 1.25Kg
 Z15-G : 1.3Kg
Dimensions 200mm ×200mm ×230mm
Frame Dimensions For Camera (Inside)  Z15-N : 115mm ×75mm