CommScope Trunk & Distribution Cable - Manual (Page 7)

Introduction 1.3
ACT ® - Advanced Coring Technology
P3 ® - Traditional Reliability
P3 is the standard by which all coaxial cables are measured.
The P3 center conductor is copper-clad aluminum for superior RF transmission.
The P3 dielectric is a closed-cell polyethylene that is compressed during the swaging
process. Compression provides superior bending. The closed-cell nature of the dielectric permits
an impressively high velocity of propagation of 87%.
The P3 shield, a solid and robust aluminum construction, provides 100% RF protection and
solid mechanical performance.
Migra-Heal ® , CommScope’s special underjacket compound, helps fill in jacket damage
before moisture can seep in and cause corrosion.
The P3 jacket is a tough medium-density polyethylene
compound designed to resist the effects of sun, moisture
and temperature extremes. CableGuard ® , a unique crush
resistant jacket, is also available.
Steel armor is available for added protection.
P3 and Service –
the two names
most often
associated with
CommScope