beautypg.com

Introduction, Redwood director and redwood engines, Accessing the redwood manager admin console – CommScope Redwood version 3.2 User Manual

Page 4: Navigating the tabs of redwood manager

background image

Commissioning and Administration User Guide

1

Introduction

Before you can begin using the Redwood Systems Building and Lighting Platform, you must

commission the light Fixtures and Switches. Commissioning is performed after the physical

infrastructure is installed. The Redwood Manager makes it easy to step through the process.

As an administrator, in addition to commissioning, you can manage and control the Redwood

System lights. You can temporarily override Policies, create Scenes to adjust the lighting for

specific situations, generate reports, perform diagnostics, and monitor usage.

Redwood Director and Redwood Engines

The Redwood Director and Redwood Engine run the embedded Redwood Manager software

used in the commissioning process and administrative maintenance.

The Redwood Engine powers and communicates with Redwood Gateways, Sensors and Wall

Switches, ultimately controlling the light Fixtures. The Redwood Director is an appliance that

provides unified management, control, and reporting on a Cluster of Redwood Engines. The

Director communicates with and manages the Redwood Engines. The Director can only

control Engines running the same Redwood Manager software version and connected to the

same Cluster (see “Redwood Networking Guide”).

Accessing the Redwood Manager Admin Console

You can access the Redwood Application Launch Page by connecting to the Redwood

Cluster (Director or Engines) through a web browser from a computer that is connected to the

same network as the Redwood platform. If you do not have the web address and login

credentials, contact your IT department, Facility Manager, or Lighting Administrator. The

address can be set up as either a DNS entry, such as https://buidling_lighting/, or a standard

IP address, like https://173.255.244.27/.

Accessing the platform requires a username and password. The default username is

admin,

and the password is

redwood. You can change the password after you log in for the first time.

After logging in, click on the “Manager” tile to open the application.

Navigating the Tabs of Redwood Manager

Once you have logged into the Redwood Manger you will arrive on the Dashboard. There are

six distinct tabs that will allow you to commission and administer the system. These tabs are

defined in the following sections.