CommScope Redwood version 3.2 - Manual (Page 37)

Commissioning and Administration User Guide 34
Installer
The Redwood Installer provides Fixture information, such as configuration information, the
required number of ports, and the Engine that powers the Fixture.
To access the Installer:
1. Log in to the Redwood Application Launch Page as an admin user.
2. Click on the “Installer” tile to open the Software Update page.
The Engine’s ports will be shown along with a representation of the Cluster and several other
data tables. Clicking a Fixture in the table on the lower left will display configuration
information such as the Fixture’s vendor and its required number of ports. The Engine that
powers this selected Fixture will be highlighted in the upper right table.
The top of the Installer shows port information.
Indicator Status
No connection is detected on this port.
Connection is active.
Attention is required.