beautypg.com

Events – CommScope Redwood version 3.2 User Manual

Page 18

background image

Commissioning and Administration User Guide

15

Events

At a high level, an Event can be thought of as the “when and why” of a lighting change. Each

Location has a set of prioritized Events – several Events may be “active” at once due to

scheduling or external signals, but only the Event with the highest priority will actually apply its

lighting Policy.

To create an Event:

1. Select the Location from the Location Settings tab.
2. Click
3. Choose if the Event will be a New Scheduled, New Unscheduled or Existing Event and

provide a name if not selecting an Existing Event. Click Next.

4. For a Scheduled Event, you will need to define if this is a One-Time or Recurring Event

and specify the start and duration in terms of time or days. In the case of a Recurring

Event you will also need to define on which days of the week the Event should repeat.

Click Next to attach a Policy.

- To create an unscheduled Event, select Unscheduled and click Next to attach a Policy.
- When selecting an Existing Event you will not be allowed to edit the schedule for the

Event.

5. Select an existing Policy from the list or click to create a new one.
6. Click Finish.

Note: Because an unscheduled Event is activated by an external signal, such as a demand

response system, it requires additional configuration within the Redwood Manager.

Modifying an Event

1. Select the Location you want to remove the Event from using the Location Settings tab.
2. Click
3. Select Existing and make your changes.

Note: If you simply want to assign a different Policy to the Event you can use the Pencil icon

found next to the Policy name on the Event priority list.

Deleting an Event

You can delete an Event from “All Locations” if it is not used by a Location. If the Event is

used by a Location, first remove it from the Location.

To delete an Event:

4. Select the Location you want to remove the Event from using the Location Settings tab.
5. Click the ic on next to the Event name. Redwood Manger will confirm your intent.