Setting scene control switches – CommScope Redwood version 3.2 User Manual
Page 25
Commissioning and Administration User Guide
22
Setting Scene Control Switches:
If a Location has a Scene Control Wall Switch, you can assign up to four Scenes to the Switch
buttons to allow users to select a particular Scene.
To assign a Scene to a Redwood Wall Switch
3. In the Maintenance tab, click the Location on the left and select the Wall Switch in the
middle pane.
4. From the drop-down menu in the right pane, select Configuration.
5. Under Scenes, map a Scene to a button from the options available in the drop-down
menu.
6. Click Apply.