Brother NC-4100H - Manual (Page 74)

CHAPTER 6 NOVELL NETWARE PRINTING
6-7
Configuring the Brother Print Server
(Queue Server Mode in NDS mode) using
BRAdmin
1. Make sure that you logged in as ADMIN in NDS mode.
2. Start the BRAdmin program.
3. One or more print server services will appear in the list of printers (the
default node names are BRN_xxxxxx, where "xxxxxx" is the last six digits
of the Ethernet address (MAC address)). Brother NC-2000 series print
servers appear as BRO_xxxxxx.
You can find the node name and MAC address by printing out the printer
configuration page. Refer to the Quick Setup Guide for information on how to print
the configuration page on your print server.
4. Select the printer that you wish to configure and double click it. You will be
asked for a password. The default password is "access".
5. Select the NetWare tab.
a. If it is not already selected, select Queue Server mode.
b. Select the correct NDS tree and NDS context (you can manually enter
this information, or by clicking on the down arrow by the side of NDS
tree and the Change button by the side of NDS Context, you can let
BRAdmin display your choices automatically. Once you have specified
this information, click on the Change NDS queues button.
c. In the NetWare Print Queues screen select the appropriate TREE and
Context and then Click the New Queue button.
d. Enter the queue name and specify the volume name. If you do not know
the volume name, select the Browse button to browse the NetWare
volumes. When the information is entered correctly, select the OK
button.
e. Your queue name will appear in the TREE and Context that you
specified. Select the queue and click on Add. The queue name will then
be transferred to the Service Print Queues Window. You will be able to
see the TREE and Context information along with the queue name
information in this Window.
f. Click on the Close button. Your Brother print server will now log into
the appropriate NetWare server.
Now exit the BRAdmin application. You are ready to print.