Brother NC-4100H User Manual
Page 58
CHAPTER 5 BIP INTERNET PRINTING INSTALLATION
5-5
3.
Click on the Internet tab.
4.
Enter the IP address of the POP3 server (consult your network administrator
if you do not know this address).
5.
Enter the mailbox name for the remote Brother print server. Usually this will
be the first part of the E-mail address (for example, if the E-mail address of
the print server is emailprinter@xyz, then the mailbox name would be
emailprinter).
6.
Enter the password for the mailbox, if any.
7.
The print server is configured by default to poll the POP3 server every 30
seconds. You may change this value, if desired.
8.
If you have enabled notification, enter the IP address of your SMTP server
(consult your network administrator if you do not know this address).
9.
Press the OK button and save the changes. Now exit BRAdmin utility. You
have now configured the print server to receive print jobs.