Brother NC-4100H - Manual (Page 48)

CHAPTER 4 NETBIOS PEER-TO-PEER PRINTING
4-4
NetBIOS Port Monitor for Windows
95/98/Me, NT4.0/2000
This software requires the TCP/IP transport protocols to be installed on your
Windows 95/98/Me, NT4.0/2000 computer. To install those protocols refer to your
Windows documentation.
If you are using the TCP/IP protocol, the proper IP address should be defined on both
the Brother print server and your client PC.
Installing the Brother NetBIOS Port
Monitor
1. Start the CD-ROM installation menu program according to the Quick Setup
guide.
2. Select the proper Model and Software Installation menu. Then select the
Network Print Software menu to start the Brother Network Print Software
installation program.
3. Push the Next button in response to the Welcome message.
4. Select Brother Peer-to-Peer Print (NetBIOS) installation
5. Select the desired directory to install the Brother Network Direct Print files
and push Next.
6. Enter the Port name that you wish to use. The port name must start with
"BNT". For example BNT1. Whichever name you choose, it must be unique.
Then press "OK". The name must be unique on your PC, however other
computers can use the same port name as the name you specify on your PC.
7. You must now enter the server name and port name for actual print server.
You can use the Browse button for searching the print server, select the
domain/workgroup name, and then the server is listed. If the print server
does not automatically appear in your browse list, then you must ensure that
the domain name is configured correctly. Otherwise you must enter the
name manually. The name should be compliant with UNC (Universal Name
Convention). For example "\\NodeName\ServiceName".