Calculated Industries 4065 v3.1 User Guide - Manual (Page 9)

U
SER
’
S
G
UIDE
— 1
KEY DEFINITIONS
Basic Operation Keys
o On/Clear — Turns power on. Pressing once clears
the display. Pressing twice clears all temporary values.
O Off — Turns all power off, clearing all non-permanent
registers. For desktop model 44080, press Ç o
to turn power off.
+ – x Arithmetic operation keys.
÷ =
%
Four-function (+, -, x, ÷) percent key. (See page 25
for examples.)
0 – 9 and • Keys used for entering digits.
) (
DESKTOP ONLY
) Enters “00” to save keystrokes (e.g.,
1 ) to enter 100).
B Backspace Key — Used to delete entries one key-
stroke at a time (unlike the o function, which
deletes the entire entry).
Convert Ç Key — Unit Conversions and Second Functions
The Ç key is used to convert between measurement units or to
access the second functions listed below:
Ç x Clear All — Clears all values, including Memory.
Resets all permanent entries to default values
(except Preference Settings which are retained).
Note: Use only when necessary, as it resets all stored values to
factory defaults. See page 82 for a listing of default values.
Ç % x 2 — Squares the value in the display. For example,
to square the value 10, enter 1 0 then З % .
З B Square Root Function ( ) — Used to find the
square root of a non-dimensional or area value
(e.g.,
1 0 0 Ç B = 10).
Ç / x10 y — Allows entry of an exponent. For example,
8 Ç / 1 4 is 8 times 10 to the 14th power.
З ч 1/x — Finds the reciprocal of a number (e.g., 8
З ч = 0.125).
GETTING STARTED