36 — c, Find wall area, Find the perimeter – Calculated Industries 4065 v3.1 User Guide User Manual
Page 44: Blocks), 116 blocks), Enter length then calculate number of blocks, Display the stored block length

36 — C
ONSTRUCTION
M
ASTER
®
P
RO
/ T
RIG
/ D
ESKTOP
Number of Blocks, Based on Calculated Perimeter
Calculate the wall’s perimeter if the length is 30 Feet and width is 45
Feet. Then, find the number of blocks required. Add a 3% waste
allowance.
KEYSTROKE
DISPLAY
1. Find wall area:
o o
0.
3 0 f l
LNTH 30
FEET
0
INCH
4 5 f W
WDTH 45
FEET
0
INCH
2. Find the perimeter:
W W W
PER 150
FEET
0
INCH
3. Find the number of blocks for the displayed perimeter, and add
3% waste allowance:
= Ç l
(Blocks)
BLKS 112.50
+ 3 %
115.875
(116 Blocks)
Number of Blocks, Based on Entered Length
Calculate the number of blocks required for a length of 20 Feet.
KEYSTROKE
DISPLAY
1. Enter length then calculate number of blocks:
o o
0.
2 0 f
20
FEET
Ç l
(Blocks)
BLKS 15.
2. Display the stored block length*:
l
B-LN
16
INCH
Note: The calculator will calculate the number of blocks based on the entered length
and the stored block size (length).
*If the stored block length is not 16 Inches, then enter the following:
1 6 i ß 4
(Blk Size)
B-LN
16
INCH
STORED
STORED