Calculated Industries 4065 v3.1 User Guide - Manual (Page 4)

GETTING STARTED..........................................................................1
KEY DEFINITIONS .........................................................................1
Basic Operation Keys ..................................................................1
Convert
Ç Key – Unit Conversions and Second Functions ....1
Memory and Storage Functions...................................................2
Recall
® Key.............................................................................3
Dimensional Measurement Unit Keys..........................................3
Area and Volume Keys (
NOT AVAILABLE ON TRIG MODEL
#4080)......4
Weight Keys .................................................................................5
Construction Project Keys and Functions....................................6
Block/Brick Function (
NOT AVAILABLE ON TRIG MODEL
#4080) ..........6
Circular/Arc Function Keys ..........................................................7
Column/Cone Function ................................................................8
Compound Miter/Crown Moulding Keys ......................................8
Drywall Function (
NOT AVAILABLE ON TRIG MODEL
#4080) ................9
Footing Function (
NOT AVAILABLE ON TRIG MODEL
#4080)................9
Polygon Function .........................................................................9
Right Triangle/Roof Framing Keys .............................................10
Hip/Valley and Jack Rafter Keys ................................................11
Rake-Wall Function....................................................................13
Roof Materials/Covering Function..............................................14
Stair Key ....................................................................................14
Studs Function ...........................................................................16
Trigonometric Keys (
TRIG
#4080
AND DESKTOP
#44080
MODELS ONLY
) ...........................................................................16
ENTERING DIMENSIONS ............................................................18
Entering Linear Dimensions.......................................................18
Entering Square/Cubic Dimensions ...........................................18
SETTING FRACTIONAL RESOLUTION.......................................20
Setting Fraction Resolution – Using the Preference
Setting Mode ...........................................................................20
Converting a Fractional Value to a Different Resolution............21
CONVERSIONS (LINEAR, AREA, VOLUME) ..............................22
Linear Conversions ....................................................................22
Converting Feet-Inch-Fractions to Decimal Feet .......................22
Converting Decimal Feet to Feet-Inch-Fractions .......................22
Converting Fractional Inches to Decimal Inches .......................23
Converting Decimal Inches to Fractional Inches .......................23
Square Conversions ..................................................................23
TABLE OF CONTENTS