Calculated Industries 4065 v3.1 User Guide - Manual (Page 77)

U
SER
’
S
G
UIDE
— 69
Roof Covering — Entering Rise, Run (No Pitch) and Area
Find the roof covering, Pitch and plan area if the Rise is 10 feet and
Run is 15 Feet. The length of the floor area is 50 Feet and the width is
30 Feet.
KEYSTROKE DISPLAY
1. Enter Rise, Run, length and width:
o o 0.
1 0 f r RISE 10
FEET
0
INCH
1 5 f R RUN 15
FEET
0
INCH
5 0 f l LNTH 50
FEET
0
INCH
3 0 f W WDTH 30
FEET
0
INCH
2. Find roof area, number of roofing squares, number of bundles,
stored bundle size, number of 4 x 8 sheets, Pitch and plan area:
Ç d (Roof) ROOF 1082.776
SQ FEET
d SQRS 18.03
d BNDL 54.08
d B-SZ 33.33
SQ FEET
d 4X8 56.34
d PTCH 8
INCH
d PLAN 1500.
SQ FEET
For Trig Model (#4080) Users:
As this model does not have l and W keys, you must calculate area the stan-
dard way (e.g., L x W, or entering 200 Square Feet), then press Ç d .
STORED