Bird Technologies SA-1700-P - Manual (Page 28)

Bird Site Analyzer
18
Setting the Frequency
Frequencies can be set manually or chosen from a list
of presets. If the start, stop, center, or span is
manually changed, the band will become “Custom”.
☞
NOTE: Changing the frequency settings will
automatically turn calibration off. Always set
the frequency before calibrating the unit.
☞
NOTE: If a frequency outside of the Site
Analyzer’s range is entered, the unit’s minimum or
maximum frequency will be set instead.
Press from
Measure
Match Mode
Press to
display the
frequency
settings
Measure Match Mode
Start: MHz
Stop: 1700.00 MHz
25.00 Center: 862.50 MHz
Span: 1675.00 MHz
Band List: Custom
25.00 MHz 1700.00
99.99
1.00
V
S
W
R
Freq
Scale
Limit
Line
Cable
Loss
Freq
Scale