Bird Technologies SA-1700-P - Manual (Page 27)

17
Chapter 4 Measure Match Mode
This measurement verifies and monitors the match
conditions in the antenna system at various
frequencies. The results are shown on an x-y graph.
Frequency is shown on the x-axis while return loss,
cable loss, or VSWR is shown on the y-axis.
☞
NOTE: For best results, set the frequency and
calibrate the Site Analyzer immediately before
taking measurements.
Press the
Mode key
Press from
Select Mode
Calibration: OFF
25.00 MHz 1700.00
99.99
1.00
V
S
W
R
Measure Match Mode
Save/
Recall
Auto
Scale
Limit
Test OFF
HOLD
Print
Measure
Match
Fault
Location