Safety symbols, Warning statements – Bird Technologies DA40 UHF Series-Manual User Manual
Page 4
Bird Technologies
ii
Safety Symbols
This symbol indicates that a shock hazard exists if the pre-
cautions in the instruction manual are not followed.
The caution symbol appears on the equipment indicating
there is important information in the instruction manual
regarding that particular area.
This symbol indicates that the unit radiates heat and should
not be touched while hot.
Note:
Calls attention to supplemental information.
Warning Statements
The following safety warnings appear in the text where there is dan-
ger to operating and maintenance personnel, and are repeated here
for emphasis.
See page 14.
WARNING
Warning notes call attention to a procedure, which if not correctly
performed, could result in personal injury.
CAUTION
Caution notes call attention to a procedure, which if not correctly
performed, could result in damage to the instrument.
WARNING
Turn off AC power and RF power before removing or replacing the
access panel; the potential for electrical shock exists.
WARNING
Ensure the power is turned off when attaching power cable or wire.
WARNING
Never attempt to connect or disconnect an RF cable or line while
power is on at the RF power source. Radiated RF energy is a
potential health hazard.