Bird Technologies DA40 UHF Series-Manual - Manual (Page 36)

Bird Technologies
22
Cleaning and Inspection
A main factor in effective preventive maintenance is cleanliness. For
optimum performance and service life, the load must be kept in a
clean, dust-free condition.
The following steps can be used to maintain cleanliness of the unit.
z The outside surface of the load should be wiped free of dust
and dirt when necessary.
z Check the condition of the RF coaxial connection occasionally.
z If required, disconnect the unit from the transmission line and
clean the RF connector parts, both metallic and insulator sur-
faces.
Note: When cleaning these parts and all other electrical
parts, use a dry cleaning solvent that leaves no residue.
Preparation for Storage or Shipment
Storage
Note: There is no special preparation for the unit.
1. Cover the equipment to keep out dust and dirt.
2. Store the unit in a dust-free, dry environment with an ambient tem-
perature range of -40°C to 45°C (-40°F to +113°F) and the relative
humidity should remain low.
Shipment
1. Secure all loose parts such as the swivel flange.
2. Pack the unit securely in a sturdy wooden box or equivalent.
Note: If possible, keep the original shipping carton for
reshipment.
3. Pad the container with sufficient padding to avoid shock damage.
4. Seal the container securely.