Bird Technologies AT-800-Manual - Manual (Page 44)

Bird AT-800 Antenna Tester
26
Select Measurement Units
Antenna match information can be presented using
four different measurement units. Depending on the
application, follow the steps below to select Rho,
VSWR, %Match or Return Loss.
1. Press the MENU key.
2. Press the MEAS MATCH key.
3. Press the SWEPT FREQ key.
4. Press the MEAS UNITS key.
5. Press the UNITS key.
6. Press either the RHO, VSWR, %MATCH or
RETURN LOSS key.
Note: The selected unit will be shown on
the left side of the display.
7. Press RETURN to go back one menu level or MENU
to return to the top menu level.
Select Auto or Manual Scale
Selecting the scale simply sets up how the information
will look on the display.
1. Press the MENU key.
2. Press the MEAS MATCH key.
3. Press the SWEPT FREQ key.
4. Press the MEAS UNITS key.
5. Depending on desired mode press either AUTO or
MANUAL SCALE: