Bird Technologies AT-800-Manual - Manual (Page 32)

Bird AT-800 Antenna Tester
14
Set Serial Baud Rate
Measurement data can be transferred between the
AT-800 and a personal computer using the serial port
and optional interface software. The data can then be
used for analysis, printed, or stored.
The data transfer rate (baud rate) between the
Antenna Tester and computer must be identical and
set to 9600. To change the baud rate for the serial port
on the Antenna Tester, follow the steps below.
Complete interface software instructions are included
with the software.
1. Press the MENU key.
2. Press the UTIL key.
3. Press the SERIAL key.
4. Repeatedly press the SERIAL key until the 9600
is displayed.