Bird Technologies AT-800-Manual - Manual (Page 3)

ii
Safety Precautions
The following are general safety precautions that are
not necessarily related to any specific part or proce-
dure, and do not necessarily appear elsewhere in this
publication. These precautions must be thoroughly
understood and apply to all phases of operation and
maintenance.
WARNING
Keep Away From Live Circuits
Operating Personnel must at all times observe
general safety precautions. Do not replace
components or make adjustments to the inside of the
test equipment with the high voltage supply turned
on. To avoid casualties, always remove power.
WARNING
Shock Hazard
Do not attempt to remove the RF transmission line
while RF power is present.
WARNING
Do Not Service Or Adjust Alone
Under no circumstances should any person reach
into an enclosure for the purpose of service or
adjustment of equipment except in the presence of
someone who is capable of rendering aid.