Bird Technologies AT-800-Manual - Manual (Page 43)

Measure Match
25
Start Stop MHz
The cursor will blink on the start frequency and Start
Stop MHz will be highlighted.
a. Enter the frequency using the numeric
keypad or change the frequency using the
UP/DOWN
arrow keys.
b. Press the ENTER key.
Note: The cursor will blink on the stop
frequency.
c. Enter the frequency using the numeric
keypad or change the frequency using the
UP/DOWN
arrow keys.
d. Press the ENTER key.
Note: The tester will begin sweeping.
Center MHz
The cursor will blink on the Center frequency and
Center MHz will be highlighted.
a. Enter the frequency using the numeric
keypad or change the frequency using the
UP/DOWN
arrow keys.
b. Press the ENTER key.
Note: The tester will begin sweeping.
c. Press the SPAN key.
d. Enter the frequency using the numeric
keypad or change the frequency using the
UP/DOWN
arrow keys.
e. Press the ENTER key.
Note: The tester will begin sweeping.