Bird Technologies SK-4000-TC-Manual - Manual (Page 44)

32
CSV Files Save
Save trace data, activating the trace first.
1.
Select Save file.
2. Choose save type first.
3. Choose the save file type.
Tracing Data SIP File
SiteHawk S- can save the parameters to the S1p file. The SIP file contains the fre-
quency value and S-parameter.
*.s1p files are used to store a single port parameter.
Only one path of data is saved to the file.
The file contains a comment, title and track data lines. Comment on"!" Mark the
start of the title, and began to "#" mark.
For single port measurement *.s1p file:
The Touchstone file contains the notes, the title and track data lines. Comment
on"!" Mark the start of the title, and began to "#" mark.
Note: Hz——frequency measurement unit (kHz ǃ MHzǃ GHz) ˗
FMT—— Data Format ˖
RI——Real part and Imaginary part
MA——Linear Amp and Phase
DB——Log Amp
˄dB˅ and Phase
Z0——reference impedance
F[n]——Frequency about point N.
{…}’—— {(RI) |(MA) |(DB)}
{…}”——{(RI) |(MA) |(DB)}
SIP File Save
Save the Data Path
1. Click Save SIP.
2. Choose a path.
3. Type the file name in the pop-up dialog box.