AJA FS1 User Manual
Page 62
54
Note:
If parameter 4.5 Audio Follow Video is set to ON, then Audio Phase Ch1
selection is independently kept for each separate input: SDI 1, SDI 2, Composite,
S-Video, and Component. If Audio Follow Video is set to OFF, then another Audio
Phase Ch1 selection is used. This note applies to Parameters 21.1 through 21.8.
21.2 Audio Phase Ch2
This parameter selects whether audio phase is normal (same as passed from the
input) or inverted on channel 2. Parameter adjustments are the same as 21.1.
21.3 Audio Phase Ch3
This parameter selects whether audio phase is normal (same as passed from the
input) or inverted on channel 3. Parameter adjustments are the same as 21.1.
21.4 Audio Phase Ch4
This parameter selects whether audio phase is normal (same as passed from the
input) or inverted on channel 4. Parameter adjustments are the same as 21.1.
21.5 Audio Phase Ch5
This parameter selects whether audio phase is normal (same as passed from the
input) or inverted on channel 5. Parameter adjustments are the same as 21.1.
21.6 Audio Phase Ch6
This parameter selects whether audio phase is normal (same as passed from the
input) or inverted on channel 6. Parameter adjustments are the same as 21.1.
21.7 Audio Phase Ch7
This parameter selects whether audio phase is normal (same as passed from the
input) or inverted on channel 7. Parameter adjustments are the same as 21.1.
21.8 Audio Phase Ch8
This parameter selects whether audio phase is normal (same as passed from the
input) or inverted on channel 8. Parameter adjustments are the same as 21.1.