AJA FS1 - Manual (Page 21)

1
13 FS1 Installation and Operation Manual — Front Panel
Reference signal events that the FS1 may detect include:
Sidebar incompatibility events that the FS1 may detect include:
About video and
format
compatibility The table below shows at a glance all the conversions (and straight-through modes)
possible for given input formats. In the case of interlace formats the table lists the field
rate; for progressive formats the table lists the frame rate.
1 When the main output (SDI 1) is not 1080pSF23.98, bypass mode will not be
available.
Input signal is not compatible with selected Output
Format. Alarm Status screen shows:
“IN Incompat “
“OUT 525i 59
Reference Alarm Event Alarm Status screen will show
6.1 Genlock Source is set to “Reference”, but no
Reference signal is detected. Alarm Status screen shows:
“IN..... GEN Ref”
“OUT.... REF No Ref”
1.1 Output Format is set to “Reference”, but no
Reference signal is detected. Alarm Status screen shows:
“IN..... GEN Ref”
“OUT.... REF No Ref”
Sidebar incompatibility Event Alarm Status screen will show
Sidebar format incompatible with output format Alarm Status screen shows:
“IN..... SB Incompat”
“OUT.... SB ...”
Main input format incompatible with Sidebar keyer Alarm Status screen shows:
“IN Incompat SB...”
“OUT.... SB...”
Sidebar Input Select incompatible with Main Input
Select (both Analog inputs) Alarm Status screen shows:
“IN.... SB Incompat”
“OUT.... SB Incompat”
Video Incompatibility Detected Alarm Status screen will show
Input Possible Output Formats
525i59.94 525i59.94 720p59.94 1080i59.94
720p59.94 525i59.94 720p59.94 1080i59.94
1080i59.94 525i59.94 720p59.94 1080i59.94
1080pSF23.98 1080pSF23.98 1 1080i59.94 525i59.94
625i50 625i50 1080i50 720p50
720p50 625i50 1080i50 720p50
1080i50 625i50 1080i50 720p50
1080pSF24 1080pSF24 1080i60
1080i60 1080i60 720p60
720p60 720p60 1080i60