Rockwell Automation 2099-BMxx-S Kinetix Safe Torque-off Feature Safety Reference Manual - Manual (Page 48)

48 Rockwell Automation Publication GMC-RM002F-EN-P - June 2013
Appendix C EC Certifications
Document Control Number: IMC-0018-H-EN 2 / 4
Catalogue number 2 Series 1 Description
Note: The following motor/drive combinations are permitted for the purposes of this declaration.
Bulletin 2099 Drives:
2099-BM06-S
30 HP Servo drive
2099-BM07-S 40 HP Servo drive
2099-BM08-S 50 HP Servo drive
2099-BM09-S 75 HP Servo drive
2099-BM10-S 100 HP Servo drive
2099-BM11-S 150 HP Servo drive
2099-BM12-S 200 HP Servo drive
Bulletin 2099 and Bulletin 2090 Filters and Accessories
2090-XXLF-TC336
Line filter, 3 phase, 36 Ampere
2090-XXLF-TC350 Line filter, 3 phase, 50 Ampere
2090-XXLF-TC365 Line filter, 3 phase, 65 Ampere
2090-XXLF-TC3100 Line filter, 3 phase, 100 Ampere
2090-XXLF-TC3150 Line filter, 3 phase, 150 Ampere
2090-XXLF-TC3200 Line filter, 3 phase, 200 Ampere
2090-XXLF-TC3250 Line filter, 3 phase, 250 Ampere
Cables
2090-XXNFMP-Sxx
Motor feedback cable, for MPL motors or 1326AB motors or 8720SM
motors using the MP connector system
2090-UXNFBMP-Sxx Motor feedback cable, for MPL motors or 1326AB motors or 8720SM
motors using the MP connector system
2090-XXNPMP-zzSxx Motor power cable, for MPL motors or 1326AB motors or 8720SM
motors using the MP connector system
2090-MCNPMP-zzSxx Motor power cable for MPL-B960D or –B980D motors
2090-UXNBMP-18Sxx Motor brake cable
2090-XXTFMP-Sxx Continuous Flex Motor feedback cable, for MPL motors or 1326AB
motors or 8720SM motors using the MP connector system
2090-XXTPMP-YYSLL Continuous Flex Motor Power cable, for MPL motors or 1326AB
motors or 8720SM motors using the MP connector system, YY = wire
gauge, LL = length in meters
2090-UXTBMP-18SLL Continuous Flex Motor brake cable, motors using the MP connector
system, LL = length in meters
2090-XXNFMF-Sxx Motor feedback cable, for MPL motors or 1326AB motors or 8720SM
motors using the MP connector system
2090-XXNPMF-zzSxx Motor power cable, for MPL motors or 1326AB motors or 8720SM
motors using the MP connector system