Rockwell Automation 2098-DSD-xxx Ultra3000 Drive Systems Design Guide - Manual (Page 39)

Rockwell Automation Publication GMC-RM008A-EN-P - September 2011 39
Ultra3000 Drive Systems
Ultra3000 (400V class) Drives/MP-Series Food Grade Motor Curves (continued)
Ultra3000 (200V class) Drives with MP-Series Stainless Steel Motors
This section provides system combination information for the Ultra3000 (200V class) drives when matched with
MP-Series stainless-steel motors. Included are motor power/brake and feedback cable catalog numbers, system
performance specifications, and the optimum torque/speed curves.
Bulletin MPS Motor Cable Combinations
For cable configuration illustrations and feature descriptions, by catalog number, refer to 2090-Series Motor/Actuator Cables Overview beginning on page 7 .
Motor-end connector kits, and panel-mounted breakout components (drive end), are available for motor power/brake and feedback cables. Refer to Optional Drive Accessories on page 6 .
Cable length xx is in meters. Refer to the Kinetix Motion Accessories Technical Data, publication GMC-TD004 , for standard cable lengths.
Bulletin MPS Motor Performance Specifications with Ultra3000 (200V class) Drives
Performance specification data and curves reflect nominal system performance of a typical system with motor at 40 °C (104 °F) and drive at 50 °C (122 °F) ambient and rated line voltage. For additional
information on ambient and line conditions, refer to Motion Analyzer software, version 4.7 or later.
Motor Cat. No. (200V class) Motor Power Cable Motor Feedback Cable
(1)
(1) Use drive-mounted breakout board (catalog number 2090-UXBB-DM15) on the drive end. Refer to Required Drive Accessories on page 4 .
MPS-A330P
2090-XXNPMF-16Sxx (standard, non-flex)
2090-CPxM4DF-16AFxx (continuous-flex)
2090-XXNFMF-Sxx (standard, non-flex)
2090-CFBM4DF-CDAFxx (continuous-flex)
Absolute High-resolution Feedback
MPS-A4540F
Rotary Motor
Speed, max
rpm
System Continuous
Stall Current
A 0-pk System Continuous
Stall Torque
N•m (lb•in) System Peak
Stall Current
A 0-pk System Peak
Stall Torque
N•m (lb•in) Motor Rated
Output
kW
Ultra3000
200V-class Drives
MPS-A330P 5000
5.0 1.80 (16) 15.0 5.20 (46)
1.3
2098-DSD-010
9.80 3.60 (32) 30.0 9.30 (82) 2098-DSD-020
MPS-A4540F 3000 14.4 8.1 (72)
30.0 15.9 (141)
1.4
2098-DSD-030
56.0 27.1 (240) 2098-DSD-075
Torque
(N•m)
Torque
(lb•in)
Speed (rpm)
2098-DSD-150 and MPF-B540K
0 2000 4000
60
50
40
30
20
10
0
3000 1000
531
442
354
265
177
88.5
0
= Intermittent operating region
= Continuous operating region
= Drive operation with 400V AC (rms) input voltage