Rockwell Automation GV3000/SE 230VAC 1-20 HP GP & Vector Drive Ver. 6.04 Software Start-Up and Ref. User Manual

Page 30

1-16

GV3000/SE 230 VAC Drive, Software Reference Version 6.04

Step 5.16 Press the

key to increase the torque boost voltage, or the

key to

decrease torque boost voltage.

Important:

If you set H.003 = 0, you must perform the identification test, controlled by

H.020, prior to running. Refer to the H.020 parameter description for
more information.

The adjustment range is:

0.0% to 20.0%

VALUE ENTERED:

Step 5.17 Press the ENTER key to save the changed value.

After pressing ENTER, the same parameter
is displayed. You can now move to the next
parameter.

AUTO

MAN

Forward
Reverse

PROGRAM

RUN
JOG

STOP

RESET

START

ENTER

SPEED
VOLTS
AMPS
Hz
Kw
TORQUE
Password

RUNNING
REMOTE
JOG
AUTO
FORWARD
REVERSE
PROGRAM

Step 5.18 Press the

key until H.017, Input Power/Snubber Configuration, is

displayed.

This parameter selects the input power
supply type/snubber resistor kit
configuration. See chapter 4 for more
information.