Rockwell Automation RSBizWare BatchCampaign Users Guide - Manual (Page 37)

33
4
Using RSBizWare BatchCampaign
This chapter provides you with information on using RSBizWare™ BatchCampaign™,
including the use of commands, displays, and button functions.
The following topics are covered:
„ Starting RSBizWare BatchCampaign
„ RSBizWare BatchCampaign User Interface
„ Configuring the RSBizWare BatchCampaign Database
„ Working with Servers
„ Working with an HMI
Starting RSBizWare BatchCampaign
The following steps will guide you through the process of starting RSBizWare
BatchCampaign.
1. Make sure the FactoryTalk Batch Server is running.
2. Click the Start button, point to All Programs > Rockwell Software > RSBizWare >
BatchCampaign, and then select BatchCampaign.
3. The BatchCampaign main window opens. (See “RSBizWare BatchCampaign User
Interface” for more information.)
If this is the first time BatchCampaign has been started, you may see an Error! dialog box. This
occurred because BatchCampaign has not yet been configured. (See “Configure RSBizWare
BatchCampaign” for more information.)
BatchCampaign.book Page 33 Wednesday, September 19, 2007 4:58 PM