Rockwell Automation RSBizWare BatchCampaign Users Guide - Manual (Page 25)

3 • Installing RSBizWare BatchCampaign
31
•
•
•
• •
4. The Name box is used to identify the FactoryTalk Batch Server consistently within the
BatchCampaign application. Enter a unique Name and Node Address to be
associated with this server.
You can browse your network to locate the desired server by selecting the Browse
button (shown at right) to the right of the Node Address box.
5. Enter a valid Scan Rate. The default scan rate is 500 milliseconds. The scan rate can
range from 1 to 999,999 milliseconds.
6. The Time Out value is the time that BatchCampaign will wait before it determines
that communication is lost with the FactoryTalk Batch Server. The default timeout for
the communication with the FactoryTalk Batch Server is 10,000 milliseconds. The
timeout can range from 1 to 999,999 milliseconds.
Enter a valid Time Out value.
7. Enter the desired Batch List Count. This is the number of batches within a campaign
that can be running on a FactoryTalk Batch Server. The default configuration is 5
batches per campaign. The number of batches allowed per server or per campaign
must be between 1 and 999,999.
8. When everything is complete, click OK twice and the server displays in the hierarchy
pane (on the left of the BatchCampaign window).
BatchCampaign has now been installed, configured and is ready for use. (See “Using
RSBizWare BatchCampaign” for more information.)
BatchCampaign.book Page 31 Wednesday, September 19, 2007 4:58 PM