Rockwell Automation 7000 PowerFlex Medium Voltage AC Drive (B Frame) Commissioning - ForGe Control - Manual (Page 9)

Rockwell Automation Publication 7000-IN012B-EN-P - June 2014 9
Chapter
1
Important User Information
This document provides procedural information for commissioning the
PowerFlex 7000 medium voltage “B” Frame drives (heat sink and heat pipe
models).
Who Should Use This Manual This manual is intended for use by personnel familiar with medium voltage and
solid-state variable speed drive equipment. The manual contains material that
enables Rockwell Automation field service engineers to commission the drive
system.
What Is Not in this Manual This manual provides information specific to commission the PowerFlex 7000
“B” Frame drive. It does not include topics such as:
• Physically transporting or siting the drive cabinetry
• Installation and pre-commissioning procedures
• Meggering safety procedures.
• Dimensional and electrical drawings generated for each customer’s order
• Spare parts lists compiled for each customer’s order
• Trouble-shooting potential usage problems.
Please refer to the following documents for additional product detail or
instruction relating to PowerFlex 7000 “B” Frame drives:
• Drive-specific Technical Data: additional troubleshooting, parameters,
and specification information for MV variable frequency drives
(
7000-TD002_-EN-P )
• Transportation and Handling Procedures: receiving and handling
instructions for Medium Voltage variable frequency drive and related
equipment (
7000-IN008_-EN-P )
• Installation Guide: detailed installation and pre-commissioning
procedures and information (
7000-IN007_-EN-P )
• Operator Interface Guide: HMI Offering with Enhanced Functionality
(
7000-UM201_-EN-P )
• For drives equipped with the PanelView 550 HMI,
see
7000-UM151_-EN-P.